Underwater Pool Surface Repair ?

Fast Setting
High Strength

Apply In Or Out Of Water
Remount Loose Tiles

Pro Patch 600 is a professional grade repair mortar that tin exist used in or out of h2o for excellent patching results. This fast setting, high strength patching mortar offers infrequent impact resistance, bond strength, and adhesion properties. Whether you're looking to brand a permanent repair or an emergency has merely arisen and you need a quick, lasting fix – Pro Patch 600 is the underwater swimming puddle repair mortar for yous.

This repair mortar/adhesive is excellent for replacing loose or broken tiles and creates a stronger surface than the original.

Employ To:

Make full Underwater Cracks
Precast Concrete & Physical Piping
Repair Physical Holding Tanks
Repair Swimming Puddle Walls-Steps
Stops leaks around pipes
Remount loose tiles

No Need To Bleed Puddle Water To Make Repairs

Halt water loss in your pool by applying Pro Patch 600 underwater pool repair mortar over the leaking fissure. Pro Patch 600 is a permanent, economic, and fourth dimension sensitive gear up, and you won't fifty-fifty have to drain the h2o from your pool to brand the necessary repairs. Pro Patch 600 is ideal for use by residential owners, pool service companies, country clubs, spas, gyms, golf game course swimming maintenance, landscapers, hotels, apartment complexes, and more.

Pro Patch 600 tin be used anywhere high early forcefulness and fast prepare times are required for patching. Although it was primarily designed for underwater apply, it besides performs well out of the water. Useful for both permanent and emergency repairs, Pro Patch 600 is platonic for utilise in swimming pools, masonry fountains and ponds to fill underwater cracks. It tin also be used to repair precast concrete, precast concrete pipe, or repair physical holding tanks. Pro Patch 600 delivers dependable results in minutes, offering a fast curing time of but about 30 minutes (at 70°F, 21°C).

Platonic For Use By :

Residential Owners
Pool Service Companies
Land Clubs
Spas
Gyms
Golf Course Swimming Maintenance
Landscapers
Hotels
Apartment Complexes

Pro Patch 600 is available in ten lb pails and l lb pails (53 lb weight). The guess yield is 0.4 cu. ft. (0.01 cu. 1000.) per fifty lb. pail. This underwater pool repair mortar but needs to exist mixed with water; no additional products are needed.

Pro Patch 600 can exist mixed manually or by mechanical means. Pro Patch 600 is white in color, simply cement colorants may exist added if desired.

Cementious coatings may be practical over Pro Patch 600 immediately after information technology has been applied, and paint can be practical later on Pro Patch 600 has prepare for 1 hr. Afterward its initial set fourth dimension, Pro Patch 600 tin be shaved affluent with the side of the pool.

Instructions: Mix 3 or 4 parts of Pro Patch 600 with 1 part of water, combining by mitt or with a machine for nearly i infinitesimal until a putty or trowel consistency results. Be sure that the substrate is clean, sound, and properly prepared before applying. The minimum ambient surface temperature should be at least 50°F (ten°C) and on the rise at the fourth dimension of awarding. Pro Patch 600 should not be practical to frozen surfaces and should not be re-tempered or combined with whatever admixture. At 70°F (21°C), Pro Patch 600 has a pot life of 10-15 minutes and cures in about 30 minutes. Note that common cold water (twoscore°F, four°C) will dull its set time and hot water (90°F, 32°C) will speed up its set time. Pro Patch 600 is not intended to be used as an overlay. Information technology is not necessary to apply a primer before applying Pro Patch 600. Store Pro Patch 600 at temperatures of 45°F (vii°C) or higher and keep information technology away from excessive humidity and heat. See the product label for more detailed awarding instructions.